Product Info

Low Temperature Curing Powder Coatings

Low temperature curing powder coatings1. General IntroductionThis type of coating is prepared from special compositions with unique production technics, and it is suitable for the coating of moderate density fibreboard (MDF) substrate. The coating films prepared from this type of coating have excellent mechanical property and indoor/outdoor decorativeness, so the powder coating can be widely used in the surface coating for modern furniture. It is suggested not to use it directly for the coating of outdoor appliances.2. Product SeriesProducts which can endure 230 centigrade*6h, 250 centigrade*3h and 300 centigrade*2h are available. Customers can choose the very type according to their demand.3. Physical properties of the powderDensity (g/cm3, 25 centigrade): 1.2-1.8Granularity distribution: 100% below 100 micrometre (It can be adapted to the customers' demand)4. Execution ConditionElectrostatic spraying can be employed for the coating and the film thickness of 70-90 micrometre is appropriate. (MDF substrate should be homogeneously heated in infrared oven, and the heating temperature depends on the substrate's heat capacity. )5. Curing Condition120 centigrade (surface temperature of the MDF substrate), 20 minutes. Ordinary hot-air cycling oven or drying tunnel can be used for the curing. The coating layer just sprayed had better be put in the infrared oven for the accelerated leveling if condition permitted, and then sent to ordinary ovens.6. Average coating area8-9m2/kg, film thickness: 70 micrometre (calculated according to 100% consuming of powder coating)Available in all RAL codes and customized shades.Please email us for its more coating performance and detailed spec, catalogues, brochures, shade cards and samples.

Low Temperature Curing Powder Coatings product offered by Wuhan Flight Chemical Co. Ltd

Related Products from This Manufacturer